Close
No products in the cart.
Menu
No products in the cart.

Vehicles on mySortimo Marketplace

Need a helping hand with your digital marketing efforts? Or maybe you just want proven, actionable marketing tools, tactics, and templates to implement in your business? Check out the latest deal from DigitalMarketer, and you will be on your way to helping your business grow.

Share on facebook
Share on twitter
Share on linkedin

In Hannover, Sortimo International GmbH, market leader for van racking systems, presents branch specifically equipped vehicles on mySortimo marketplace. It is a demonstration for customers of the huge bandwidth of practical and holistic application possibilities, equipment solutions and intelligent mobility concepts. Visit us at the IAA Commercial vehicles and convince yourself in Hall 13, Stand C48.

Volkswagen Crafter Commercial Vehicle – conversion for the HVAC industry

The conversion of Volkswagen’s Crafter Commercial Vehicle is based on an SR5 van racking system, which has been adapted to be branch specific for the HVAC industry. The trade’s special requirements for their service vehicles have been taken into particular account. The SR5 van racking equipment enables plumbing, heating and air-conditioning companies to achieve secure and organized stowage of their transport goods as well as immediate access to them with drawers, SR- and L-BOXXes as well as SR-Slides. Even pressurized gas cylinders can be lashed directly to the SR5 aluminum side profile through holders with belts and ratchet turnbuckle belt, meaning they are immediately on hand. The foldable workbench with vice enables mobile adjustments of materials at the site of operation. The workbench is directly integrated with the SR5 standard shelf, whereby the otherwise extra requirement of an aluminum upstand is omitted.

Volkswagen’s Crafter Commercial Vehicle will additionally be equipped with a universal side panel table. This can be mounted entirely according to individual requirements via all ProSafe points in the vehicle and, with a load capacity of up to 50 kg, is ideally suited as a workplace in the vehicle.  

Sortimo demonstrates the full compatibility of the Sortimo EcoSystem in the Crafter with the integration of complementary products from its partners, which transcend system boundaries. For example one of the Hilti cases is integrated with the SR5 van racking system via plastic slides, which is a great benefit for every tradesman and service technician and thanks to the perfectly harmonized mobility solutions, represents the highest degree of efficiency as well as the maximum in productivity in the day-to-day work routine.

Mercedes-Benz Sprinter – conversion for the electronics branch

SR5 is thought out through to the final detail. The organization system, which provides maximum productivity and workplace organization in the tightest of spaces, is the ideal daily companion for the electronics branch. Thanks to their positioning possibilities both above and below the standard shelf, the numerous integrated SR-BOXXes enable optimal exploitation of space in the vehicle and provides at the same time sufficient space for structured and overview-able transport of small components and consumable materials. The lid of the removable SR-BOXXes protects the contents from dust and dirt, both in the vehicle and on the building site. The SR-Slides, which are an alternative to drawers, provide a multitude of possibilities for organization and structuring the contents thanks to the integrable dividers and Insetboxes.

The rotary block which is integrated with the SR5 equipment, mounted at a 90° angle to the van racking equipment and equipped with three drawers, is particularly practical as it allows direct access to the drawer contents through the side slide door. The SR5 drawers can also accommodate heavy machines and tools, with a loading capacity of up to 90 Kilograms. Furthermore, the outer profiles of the SR5 equipment are furnished with the innovative ProTech power rail system which enables power supply directly into the SR5 via an existing power supply. Lights, inspection lamps and auxiliary consumers can thereby be individually positioned in diverse spots around the vehicle interior.

Electricians and service technicians are guaranteed the highest levels of productivity and optimization of their work processes by the SR5 van racking solution because it provides the maximum of organization and structure through labelling possibilities via mySortimo labels, tool inlays as well as a consistent systemization of the transported materials via the integrated Sortimo BOXXes and shelves. The intelligent shelving system is configurable online to meet branch specific and individual requirements on mySortimo and then it can be directly ordered.

Ford Transit Custom – conversion for the woodworking branch  

Carpenters and joiners receive a branch-specific equipment solution with the woodworking solution in the Ford Transit Custom, which leaves nothing to be desired. The intelligent SR5 shelving system provides diverse possibilities for the secure and organized storage of materials and small components in the LCV through a multitude of shelves and SR-BOXXes in various sizes. The two WorkMos, including perforated worktable on the dividing wall enable mobile working directly in the vehicle or at the place of operation and simultaneously exploits the loading area in the Ford Transit Custom optimally. The installed XL-drawers Jumbo-Unit in the Ford Transit Custom in the new 2 and 2.5 widths exploit the full depth of the vehicle and thereby provide maximum stowage area for large and heavy loads of up to 100 kg. The XL-drawers can be installed both horizontally as well as vertically in the vehicle and enable ideal access to the materials via the extremely strong telescopic slides. The Jumbo-Units are covered by the Sortimo SoboPro floor and can thereby be flexibly combined with the WorkMo modules, which are to be found above.

The online configurator mySortimo graphics is the ideal possibility to upgrade the company vehicle to a promotionally effective instrument with a professional and individually designed vehicle decal. The decals on the exhibition vehicles with Sortimo inside which are to be seen at the IAA, were all created on mySortimo graphics.

Renault Trafic – conversion for Facility Management

mySortimo is the central contact point for all comprehensive solutions concerning the mobile workplace for tradesmen. Sortimo’s new online platform is not only the place where the SR5 van racking solutions can be individually configured and directly ordered, but also the place where further products and services from Sortimo can be found for branch specific optimization, around the clock. mySortimo contains 24/7 Full-Service concepts for every trade to acquire a highly efficient mobile working environment. Sortimo presents a Renault Trafic at the IAA Commercial Vehicles, which has been converted with the SR5 shelving system that provides lots of storage space for tools and work materials in the area of Facility Management. The flexible TopSystem crossbeams are the ideal aid to space saving and safe transport of ladders or long bulky items. The TopSystem provides additional storage space on the roof of the vehicle and also saves valuable time thanks to its easy operation. The new side ladder lift hereby enables time-saving and ergonomic loading and unloading of ladders weighing up to 35 kg. Hereby ladders can be quickly and simply conveyed on to the roof of the vehicle. Thanks to the side access to the ladder, there is no extra loading and unloading room needed behind the vehicle, which is of particular benefit in urban areas. Just a few hand movements are required to adjust the side ladder lift for other ladder sizes and mistakes in load securing are avoided thanks to the intuitive operation.

The new Sortimo floor SoboPro Restraint Pole, which is integrated with the Renault Trafic, is especially for load securing and extends the load securing in a way that adds value. The possibility of installing Sortimo restraint poles creates extended opportunities for load securing and the load can be secured in the manner of a form fit. When using restraint poles, the SoboPro Restraint Pole is recommended, where the arrangement of lashing points is optimized for the poles. The universally applicable restraint poles can be used both horizontally and vertically for securing loads depending on the position of the attachment points. They offer an optimal hold due to their square contours. Using traverse frames, restraint poles can be used horizontally between two SR5 shelves.

Opel Combo – conversion for Service technicians

Service technicians will find everything that the tradesman desires in the Opel Combo. Small components and consumable materials are stowed in an organized fashion in the worldwide unique SR-BOXXes. These are mounted both under and above the standard shelf whereby the available space is exploited to the maximum. Moreover the slim aluminum side profiles of the SR5 van racking solution as well as the flexibly position-able standard shelves of the shelving system in the Opel Combo, make it a real space miracle and allows the maximum exploitation of the loading area on the vehicle floor. Thereby large transport goods, like euro pallets, for example, can be conveyed in the vehicle without problems. The SoboPro assembly and load-securing floor enable the simple and flexible securing of the load on the vehicle floor via the integrated universal lashing points.

Just like in the Mercedes-Benz Sprinter, a 180° degree rotary block is mounted on the sliding door of the Opel Combo that enables the direct and therefore time-saving access from to the contained tools and consumable materials from outside.   

Moreover, Sortimo is also represented on the stands of the leading Commercial Vehicle producers and presents its equipment and mobility solutions in numerous LCVs.

LET US HELP YOU

Please fill out the form below. We will call you back.

4

Standardizing

Setting standards in your vehicle and workshop? Sortimo provides you with the perfect solution to do so! The use of colour codes identifies where things belong at a glance. The structure can be individually defined. For instance, you might structure the system according to the type of content (e.g. tools, consumables, etc., and/or screws, rawlplugs, etc.), according to vehicle or employee(e.g. Red = Employee A, Green = Employee B, etc.) or based on your own individual ideas. The systematic use of standard cases and BOXXes also makes it possible to standardize and ensure that everything fits together! For example, the L-BOXX is a packaging solution for tools and consumables widely used in the marketplace.

2

Universal lashing points

The SoboPro floor has integrated lashing points which are compatible with all ProSafe applications such as lashing straps, CargoStopp, restraint poles or load safety nets thanks to universal applications.

3

Floor plate

The 7-ply glued wooden floor has a thickness of 9 mm and is made of Nordic birch. Its multi-directional textured coating makes the moisture-resistant floor scratch-resistant and extremely non-slip even in wet conditions.

4

Original lashing points

The vehicle’s original lashing points remain available using the integrated flush lashing points in the floor, and are compatible with ProSafe.

1

Sorting

Storage space and payloads are limited, particularly in your vehicle. Another reason to transport just the things you actually need. SR5 van racking provides a comprehensive overview in the vehicle and helps to identify tools or small components and organize them if required. This frees up more storage space for transport and also reduces the vehicle’s fuel consumption as a result of the reduced overall weight.

2

Systemizing

Work processes can be optimized by systematic organization in the vehicle, minimizing the time needed to search for and find things. Sophisticated arrangement of objects helps with efficient access to the contents. For example, we can eliminate the need to enter the vehicle by placing frequently used objects close to the vehicle doors.

3

Shining

Cleanliness in the vehicle reduces the time it takes you to access contents, at the same time increasing safety at work. In addition, this is the best advertisement to your customer of your profession­al working methods. Unlike an untidy vehicle, structured organi­zation in the SR5 van racking makes it possible to clean the load area simply and without the need for time-consuming clearing out. Incorporating the vehicle interior into regular vehicle maintenance definitely pays off.

5

Self-discipline

It’s also easier to discipline yourself to make use of the organizational and cleaning rules in view of the aforementioned benefits. Continuous improvement forms part of the 5S method. For this reason, your workflows always need to be critically scrutinized to maximize any potential for improvement. The flexibility of the SR5 van racking system provides for a number of adaptation options, and so it can be adapted to meet the continuously changing requirements in the world of work.

7

Drawers

The drawers offer an optimum overview with their full pull-out feature and quick access to the tools, machines or spare parts inside. Thanks to their anodized aluminium front, all SR5 elements are truly sturdy.

1

Long components tray

In the long components tray, awkward or long items such as pipes, cable ducts or aiming stakes can be stowed and transported safely. Opening the rear section allows contents to be removed simply and quickly to the rear.

2

SR-BOXX

The SR-BOXXes, which are unique in their functionality, can be integrated both on and under the shelves in the van racking using the plastic slides, meaning that the available space is used to optimum effect. Small items and consumables can be stored here.

3

SR-Drawer

SR-Drawer As an innovative alternative to a drawer, the SR drawer offers the tried and tested Sortimo SR drawer function, but it can be removed completely at any time. Dividers and insetboxes offer varied opportunities for organization.

4

Aluminium side profiles

The sturdy and compact aluminium side profiles are the basis for each SR5 shelf and require just a small space on the vehicle floor. This ensures maximum load space usage so that large items can be conveyed without any problems in the vehicle. Varied accessories for all kinds of sectors and requirements are screwed to the aluminium side profiles at any height for stepless adjustment.

5

Shelves

The positioning of the shelves can be varied forwards and back­wards, which allows the SR5 shelf to be adapted to the contour of the vehicle to optimum effect. This ensures adequate space for the load and freedom of movement. The roof area which is other­wise hardly used is exploited to the maximum. The shelves are available in various different versions, which can be equipped with SR-BOXXes both above and below.

6

mySortimo labels

The lettering labels with Sortimo colour coding perfects the organization of the load space – an important foundation for efficient working.

1

SR5 connection points

Thanks to the standard integrated connection points, Sortimo SR5 van racking can be installed quickly and easily in the vehicle.