SR5: the new generation of van racking systems.
The SR5 van racking system (Sortimo 5th generation racking) allows you to be even more organized at work:
Enter your personal needs so that in future you are given individual suggestions for a van racking system based on experience that will help you find the most efficient configuration.
In the online configuration, the price is shown in real time whenever you add or remove components. This means that you can see the price difference with every change, keeping a close eye on your budget at all times.
If you unable to make a decision immediately about whether to purchase the van racking system and would like to consult colleagues or carry on configuring the system at a later point, you can save your SR5 configuration and also duplicate it if necessary.
Our experts are happy to help you configure your van racking system, either based on a configuration you’re already working on or planning from scratch in Sortimo branches and stations. Feel free to arrange an appointment or contact our Customer Service Centre.
Arrange your personal consultation for the individual planning of the SR5 near you.
You can configure your SR5 van racking system in just a few steps – quickly, individually, at any time and with complete cost control!
mySortimo offers everything you need for a perfect work routine.
The area under the roof of the load space can be fully exploited with the SR5 by using deeper shelves. Work materials, tools and other goods can be stored here. This allows the often-unused space to be exploited to its full extent.
The shelves can be flexibly fitted depth-wise to the side profiles. This means the system can be simply adjusted to the vehicle contours and wheel housings without losing any space.
Thanks to its compact side profile, the SR5 features a slimline design and thus provides more space – especially in the loading floor area. This means that there is still space for a Euro pallet between the van racks, even in the smallest class of commercial vehicle.
Installation of the components offset to the middle of the vehicle means that the SR5 shelf ideally adapts to the contour of the vehicle. The entire depth of the shelf is retained and the roof area in the vehicle is utilized fully.
The reduction in component height at the top means that the components are still aligned in the direction of the middle of the vehicle. The advantage of this version is that the van racking system can still be used as a location for panel materials among other things. ProSafe lashing rails provide support surfaces and lashing facilities.
The SR5 allows you to systematically organize your load space. The range of components alone, such as the shelves with a range of dividers and the entire array of cases, allow you to store your work materials in an organized and secure manner.
mySortimo labels allow you to label every case, every BOXX, every drawer and every shelf or any divided-up unit of a drawer or shelf. The labels, also available in 6 different colour codes, provide an overview of the loading space so that it can be easily navigated by every employee.
The foam inlays for drawers and BOXXes provide a structured space for your tools. They are transported safely and you keep track of everything: if a part is missing, you notice it immediately.
We are happy to help you structure your van racking system. We do this with the aid of the 5S method, explained in the video below. The video also includes all key points on workplace organization with the 5S method.
ProSafe is integrated into the cross members of the van racking system in the form of lashing points and into the Sortimo SoboPro floors. The lashing points are compatible with all ProSafe hooks and restraint poles, so that you can secure the load without adapters. The ProSafe hooks also fit into the original lashing points of the vehicle, so that you can use these without modifying the vehicle further.
The SR5 can hold all BOXXes and case systems you already know from Sortimo. You can still rapidly secure your system and thereby keep everything organized with simple load securing.
With the L-BOXX family, Sortimo has set an industry standard, as it is used as a secondary packing design for many partners such as BOSCH, Gedore, fischer and more. These are quickly and securely stored in the SR5 rack like any Sortimo L-BOXX. With the SR5, Sortimo has also opened itself to other manufacturers, so that cases from Hilti, for example, can be easily clicked into and transported in the system.
Please fill out the form below. We will call you back.
Setting standards in your vehicle and workshop? Sortimo provides you with the perfect solution to do so! The use of colour codes identifies where things belong at a glance. The structure can be individually defined. For instance, you might structure the system according to the type of content (e.g. tools, consumables, etc., and/or screws, rawlplugs, etc.), according to vehicle or employee(e.g. Red = Employee A, Green = Employee B, etc.) or based on your own individual ideas. The systematic use of standard cases and BOXXes also makes it possible to standardize and ensure that everything fits together! For example, the L-BOXX is a packaging solution for tools and consumables widely used in the marketplace.
The SoboPro floor has integrated lashing points which are compatible with all ProSafe applications such as lashing straps, CargoStopp, restraint poles or load safety nets thanks to universal applications.
The 7-ply glued wooden floor has a thickness of 9 mm and is made of Nordic birch. Its multi-directional textured coating makes the moisture-resistant floor scratch-resistant and extremely non-slip even in wet conditions.
The vehicle’s original lashing points remain available using the integrated flush lashing points in the floor, and are compatible with ProSafe.
Storage space and payloads are limited, particularly in your vehicle. Another reason to transport just the things you actually need. SR5 van racking provides a comprehensive overview in the vehicle and helps to identify tools or small components and organize them if required. This frees up more storage space for transport and also reduces the vehicle’s fuel consumption as a result of the reduced overall weight.
Work processes can be optimized by systematic organization in the vehicle, minimizing the time needed to search for and find things. Sophisticated arrangement of objects helps with efficient access to the contents. For example, we can eliminate the need to enter the vehicle by placing frequently used objects close to the vehicle doors.
Cleanliness in the vehicle reduces the time it takes you to access contents, at the same time increasing safety at work. In addition, this is the best advertisement to your customer of your professional working methods. Unlike an untidy vehicle, structured organization in the SR5 van racking makes it possible to clean the load area simply and without the need for time-consuming clearing out. Incorporating the vehicle interior into regular vehicle maintenance definitely pays off.
It’s also easier to discipline yourself to make use of the organizational and cleaning rules in view of the aforementioned benefits. Continuous improvement forms part of the 5S method. For this reason, your workflows always need to be critically scrutinized to maximize any potential for improvement. The flexibility of the SR5 van racking system provides for a number of adaptation options, and so it can be adapted to meet the continuously changing requirements in the world of work.
The drawers offer an optimum overview with their full pull-out feature and quick access to the tools, machines or spare parts inside. Thanks to their anodized aluminium front, all SR5 elements are truly sturdy.
In the long components tray, awkward or long items such as pipes, cable ducts or aiming stakes can be stowed and transported safely. Opening the rear section allows contents to be removed simply and quickly to the rear.
The SR-BOXXes, which are unique in their functionality, can be integrated both on and under the shelves in the van racking using the plastic slides, meaning that the available space is used to optimum effect. Small items and consumables can be stored here.
SR-Drawer As an innovative alternative to a drawer, the SR drawer offers the tried and tested Sortimo SR drawer function, but it can be removed completely at any time. Dividers and insetboxes offer varied opportunities for organization.
The sturdy and compact aluminium side profiles are the basis for each SR5 shelf and require just a small space on the vehicle floor. This ensures maximum load space usage so that large items can be conveyed without any problems in the vehicle. Varied accessories for all kinds of sectors and requirements are screwed to the aluminium side profiles at any height for stepless adjustment.
The positioning of the shelves can be varied forwards and backwards, which allows the SR5 shelf to be adapted to the contour of the vehicle to optimum effect. This ensures adequate space for the load and freedom of movement. The roof area which is otherwise hardly used is exploited to the maximum. The shelves are available in various different versions, which can be equipped with SR-BOXXes both above and below.
The lettering labels with Sortimo colour coding perfects the organization of the load space – an important foundation for efficient working.
Thanks to the standard integrated connection points, Sortimo SR5 van racking can be installed quickly and easily in the vehicle.